Custom Furniture Services in Livingston, Montana
WHAT WE DO
The right piece of furniture starts with a room, not a catalog. Standard sizing rarely matches an actual wall, an alcove, or the way a family really uses a space. At In The Mountains Custom Furniture, every custom furniture commission is drawn, cut, joined, and finished to suit the space it will occupy. Bedroom sets, bunkbeds, tables, chairs, dressers, nightstands, and end tables all begin the same way. This page covers what we build, how the work unfolds, and what to expect.
WHERE WE WORK
The Region Our Furniture Travels To
Our workshop sits in Livingston, Montana, and our handmade furniture reaches homes and businesses across Paradise Valley, Bozeman, Big Sky, and communities within a 200 mile radius. Cabins, ranch houses, and modern builds across this region each ask something different of a piece, so proportions and finishes are decided with the actual room in mind. Local pickup, delivery, and professional setup are arranged right across that area. Bespoke woodwork travels well, so shipping carries finished pieces further still.
What Our Custom Furniture Services Cover
Wondering what we actually build? The pieces below cover the bulk of our commissions, from full bedroom sets down to the small tables nobody thinks about until they need one.
01
Bedroom Sets
Beds, dressers, and matching storage are drawn up as one coordinated group, so grain, stain tone, and hardware agree across every piece. Headboard height, drawer depth, and overall footprint are set to suit your room and your chosen mattress size.
02
Bunkbeds
Solid hardwood rails, reinforced joinery, and full guardrails carry the load that stacked sleeping demands. Ladder position, mattress clearance, and ceiling height are worked out carefully during the design stage, so the finished bunk sits safely in the finished room.
03
Tables
Dining, coffee, console, and work tables begin with the span you need and the seating count you expect. Thickness, edge profile, leg style, and base placement all follow from there, keeping legroom comfortable and unobstructed at each and every chair.
04
Chairs
Seat height, back angle, and arm placement decide whether a chair gets used or quietly avoided. We build frames from close grained hardwood, mortise the joints properly, and shape the seats so that long dinners and meetings remain comfortable throughout.
05
Dressers
Drawer boxes run on properly fitted runners, with dovetailed corners and solid bottoms that carry real weight without sagging over time. Height, width, and drawer count are set around your storage needs rather than a standard factory footprint and depth.
06
Nightstands and End Tables
Small pieces receive exactly the same joinery as large ones. Surface height is matched to your bed or sofa, and the drawer or shelf layout is arranged around lamps, books, chargers, and whatever else tends to land there over time.
Jane Faber
This is the text area for this paragraph. To change it, simply click and start typing. Once you've added your content, you can customize its design.
Jane Faber
This is the text area for this paragraph. To change it, simply click and start typing. Once you've added your content, you can customize its design.
Jane Faber
This is the text area for this paragraph. To change it, simply click and start typing. Once you've added your content, you can customize its design.
TESTIMONIALS
What Our Customers Say
Our Custom Furniture Process
Curious how a commission moves from conversation to finished room? The six stages below show exactly what happens between your first measurements and the moment we leave your own home.
01
Design Consultation
Everything begins with measurements, intended use, and any reference images you have collected. We sketch options, discuss proportions, and settle final dimensions before a single board is cut, so the finished result closely matches the piece you had already pictured.
02
Wood Selection
Oak, maple, walnut, cherry, and reclaimed timber each behave differently under load, light, and finish. We review boards with you, explain how grain, hardness, and color will age over time, then choose stock best suited to that one particular piece.
03
Joinery and Construction
Mortise and tenon, dovetail, and dowelled joints carry weight far longer than screws and adhesive alone. Frames are dry fitted, adjusted, and clamped, so that the structure stays square while the wood expands and contracts through every seasonal humidity swing.
04
Finishing and Sealing
Sanding progresses through several grits before stain, oil, or lacquer goes on in thin, even coats. Sheen level is agreed beforehand, and protective topcoats are matched to how the surface will actually be treated once it reaches your own home.
05
Quality Inspection
Before anything leaves the workshop, drawers get cycled, doors are checked for even reveals, surfaces are studied under raking light, and every leg is levelled. Anything falling short of the agreed standard goes straight back to the bench for correction.
06
Delivery and Professional Setup
Pieces travel wrapped and secured in our own vehicles rather than through a courier network. On arrival we position, level, and reassemble everything, test moving parts, then remove all packing materials so you are simply left with a finished room.
WHO WE ARE
A Workshop Built Around Solid Joinery
With 30 years at the bench, we build from solid hardwood using traditional joinery rather than fasteners and veneer, and each piece is inspected before it leaves the shop. Dimensions, wood species, hardware, and pricing are all agreed in writing before a single board is cut. Pickup, delivery, shipping, and professional setup are handled by our team. Send your measurements through our contact page and we will map out realistic options, likely timelines, and the sensible next steps.
Frequently Asked Questions
How long does it take to build a piece of custom furniture?
Most builds run several weeks from approved design to finished piece. Complexity, wood availability, and the finish schedule all affect timing, since stains and topcoats need proper cure time between coats before any piece can safely be wrapped and delivered.
What types of wood work best for custom furniture that will last?
Oak, maple, walnut, cherry, and ash all hold joinery well and wear gracefully over decades of use. Density, grain pattern, and the way each species takes stain differ noticeably, so we review samples together before committing to one particular species.
Can custom furniture be built to match pieces I already own?
Matching existing furniture is routine work at In The Mountains Custom Furniture in Livingston, Montana. We assess species, stain tone, sheen, and hardware style on your current pieces, then finish the new build so it sits comfortably alongside them all.
Do I need drawings, or can you design the piece for me?
Sketches help but are never required at any stage. Room measurements, photographs of the space, and a clear description of how the piece will be used give us more than enough to draw up several options and confirm the proportions.
How should I measure my room before ordering custom furniture?
Record wall length, ceiling height, window and door positions, and the swing of every door in the room. Note heating vents and outlets as well, since those often decide where a cabinet, dresser, or bed can actually sit in practice.
What finishes are available for custom wood furniture?
Stains, clear coats, penetrating oils, waxes, painted finishes, and sprayed lacquer all remain available options. Dining surfaces usually want a harder film finish for spill resistance, while bedroom and living room pieces often suit softer oil or wax treatments instead.
Can you build custom furniture for commercial spaces and rental properties?
Businesses, designers, property managers, and vacation rental owners all commission work from us. Commercial pieces get heavier stock and reinforced joinery, because tables and chairs in constant public use take far more daily abuse than ordinary household furniture ever would.
How do finished pieces get delivered and set up?
Pickup, delivery, shipping, and professional setup are handled by our team. Within reach of Livingston, Montana, In The Mountains Custom Furniture delivers, positions the piece, levels it, and clears packing, drawing on 30 years of careful handling and transport experience.
Why Choose In The Mountains Custom Furniture
Expert Craftsmanship You Can Trust
01
Personally Managed From Start to Finish
As an owner-operated business, every project receives direct attention, clear communication, and consistent craftsmanship. You will work with the person responsible for ensuring your furniture meets the highest standards.
02
Built Specifically for You
Our owner works closely with each client to design and create a truly custom piece suited to their space, style, and functional needs. Every detail is carefully considered to produce high-quality furniture that feels personal and lasts for generations.
03
Convenient Service From Workshop to Home
Pickup, delivery, shipping, and professional setup are available to make the entire process as convenient as possible. Whether you are located near Livingston or outside the local service area, we can coordinate the best way to transport and place your furniture.
04
Craftsmanship Backed by 30+ Years
More than 30 years of hands-on experience goes into every custom build, repair, refinishing, and restoration project. That depth of knowledge allows us to work confidently with different materials, construction methods, finishes, and furniture styles.
Bring Home Furniture Made Especially for You
Furniture chosen from a showroom asks your room to adapt, while furniture built for the room does the adapting instead. That reversal is the whole point of what we do at In The Mountains Custom Furniture in Livingston, Montana, where every bed, table, chair, and dresser starts with your measurements rather than a standard size chart. Solid stock, real joinery, and a finish applied by hand give you something that stays useful long after the trend that inspired it has passed. If a piece has been sitting on your wish list, share the dimensions and ideas through our contact page.